Miele T 430 사용 설명서 - 페이지 15

{카테고리_이름} Miele T 430에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 430 28 페이지. Vented tumble dryer
Miele T 430에 대해서도 마찬가지입니다: 사용 설명서 (29 페이지)

페이지 인쇄

Electrical appliances should only be

repaired by qualified personnel. In-

correctly repaired machines may

pose a considerable risk to the

user.

There are, however, minor faults which

can be corrected without contacting

the Service Department.

The tumble dryer fails to start

when switched on.

Check whether the "On" indicator lamp

lights up. If so, failure to start may be

due to an incorrect selection procedure

sequence when switching on the ma-

chine.

Repeat the switch-on procedure in

the correct sequence (see P. 10).

If the "On" indicator lamp does not light

up, check that

the "On/Off" button is depressed

the door is properly closed

the mains plug is plugged in and the

fuse or circuit breaker has not

tripped.

Laundry is not sufficiently dry.

The load consists of dissimilar items in

terms of size and fabric.

Select a longer drying programme

next time.

Small loads or individual items may

cause the programme to terminate pre-

maturely.

Small loads should therefore be

"time-dried".

All manuals and user guides at all-guides.com

Problem solving guide

Drying times are too long.

Clean the fluff filter in the door.

The laundry was not spun for a suffi-

ciently long time.

Ventilation is inadequate (e.g. in a small

room).

When the machine is in operation,

open a door or the window.

Items made of synthetic fibres

are charged with static elec-

tricity after drying.

Static charge can be reduced by ad-

ding fabric conditioner during the final

rinse cycle in the washing machine, or

a fabric conditioner sheet in the tumble

dryer.

Formation of fluff

Fluff is principally the result of friction

when items are worn and washed. Ma-

chine-drying hardly causes any fluff to

form and, as has been established by

research institutes, has no effect on the

lifetime of fabrics.