Miele T 430 사용 설명서 - 페이지 16

{카테고리_이름} Miele T 430에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele T 430 28 페이지. Vented tumble dryer
Miele T 430에 대해서도 마찬가지입니다: 사용 설명서 (29 페이지)

페이지 인쇄

Problem solving guide

The "Anti-crease" indicator

lamp in the sequence indica-

tor display starts flashing.

Release the "On/Off" button and

then press it in again.

Press the"Start" button.

If the indicator lamp starts flashing

again, this indicates a fault in the ma-

chine. Please then contact your Miele

Dealer or the Miele Service Dept.

The drum door opens during

the drying cycle.

The machine has overheated. The tem-

perature limiter opens the drum door

and thus causes the machine to switch

off automatically.

Possible reasons for overheating:

The fluff filter in the door is clogged

up.

The vent duct is blocked.

The vent aperture (e.g. louvred win-

dow vent, wall vent) is blocked.

Before restarting the programme, pro-

ceed as follows:

Clean the affected part of the ma-

chine.

Press the "Start" button.

Should the drum door open again, this

must be due to a technical fault and

the Service Dept. should be contacted.

All manuals and user guides at all-guides.com

The interior drum lighting fails

to function.

The bulb may be defective.

Replace it as follows:

Switch off the machine or disconnect

from the mains supply.

Open the door.

Use a 19 mm spanner to unscrew

the plastic cover inside the drum

above the door (see illustration).

The light bulb must not exceed the

maximum wattage quoted on the

data plate and the plastic light cover.

Replace the bulb and the plastic

cover.

The cover must be fixed securely, as

otherwise moisture may seep in and

cause a short-circuit.

The temperature-resistant bulb should

only be ordered from your Miele Dealer

or the Service Dept.