HP 3000 Series 업그레이드 매뉴얼 - 페이지 12
{카테고리_이름} HP 3000 Series에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 3000 Series 19 페이지. 9x9 to k class conversion
HP 3000 Series에 대해서도 마찬가지입니다: 매뉴얼 (25 페이지), 매뉴얼 (20 페이지), 설치 매뉴얼 (42 페이지)
HP3000/979KS/989KS and HP9000/K250/K260/K360/K370/K380/K450/K460 and
K570/K580 Power Supply Removal
Prior to adding CPUs to
HP9000/K250/K260/K370/K380/K450/K460 and K570/K580 systems, the
removed (see Figure 1-6). Perform the following steps:
HP3000/979KS/989KS and
Figure 1-6
HP9000/K250/K260/K360/K370/K380K370/K380/K450/K460/K570/K580
Power Supply
1. Loosen the six captive screws (item 1) along the top and bottom of the power supply unit.
CAUTION
The power supply unit weighs 26.5 lbs (12kg). Be careful removing and lifting the unit to
avoid damage to the power supply.
2. Pull the extractor levers (item 2) out. Using the extractor levers, pull the power supply unit partially
out of the chassis, then grasp the power supply unit by the handle (item 3) and remove it completely.
3. Place the power supply on an anti-static mat while proceeding with the CPU replacement procedure.
4. Remove the rear processor slot cover plate, which is now visible.
HP3000/979KS/989KS and
CPU Upgrade
Adding a CPU Card
power supply must be
7