HP 8730w - EliteBook Mobile Workstation 설정 및 구성 매뉴얼 - 페이지 14

{카테고리_이름} HP 8730w - EliteBook Mobile Workstation에 대한 설정 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 8730w - EliteBook Mobile Workstation 18 페이지. Mobile workstation
HP 8730w - EliteBook Mobile Workstation에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사용자 설명서 (15 페이지), 브로셔 및 사양 (4 페이지), 네트워크 매뉴얼 (16 페이지), 사용자 설명서 (27 페이지), 개요 (16 페이지), 소프트웨어 설치 매뉴얼 (8 페이지), 사용자 설명서 (37 페이지), 사용자 설명서 (27 페이지), 사용자 설명서 (15 페이지), 빠른 사양 (46 페이지)

Default Setting

Recommended Setting

25) Return to previous menu.

26) Hit Esc to exit.

a. Select Y.

This will exit the MEBx Setup and save settings.

27) The system will continue to the operating system.

At this point the system is out of Factory Mode and is in In-Setup mode. It is ready to be deployed in a

corporation.

28) User plugs system into a power source and connects the network.

Only use the integrated Intel NIC. Intel AMT does not work with any other NIC solution.

29) When power is reapplied to the system, it will immediately look for a Setup and

Configuration Server. If one is found, the AMT system will send a "Hello" message to the

server.

DHCP and DNS must be available for the Setup and Configuration Server search to

automatically succeed. If DHCP and DNS are not available, then the Setup and Configuration

Server's IP address must be manually entered into the AMT system's MEBx.

The "Hello" message will contain the following information:

•

PID

UUID (Universally Unique Identifier)

•

IP address

•

The "Hello" message is transparent to the end-user. There is no feedback mechanism to tell

the user the "Hello" message is being broadcast.

30) The Setup and Configuration Server will use the information in the "Hello" message to

initiates a Transport Layer Security (TLS) connection to the AMT system using TLS Pre-Shared-

Key (PSK) cipher suite if TLS is supported.

31) The Setup and Configuration server uses the PID to lookup PPS in provisioning server

database and uses the PID and PPS to generate TLS Pre-Master Secret.

TLS is optional. For secure and encrypted transactions, TLS should be used if the infrastructure

is available.

If TLS is not used, then HTTP Digest will be used for mutual authentication. It is not as secure

as TLS.

32) Setup and Configuration Server logs into AMT system with the username and password, and

provisions all required data items:

a. TLS certificates

b. Private keys

c. Current date and time

: 0x0