Burk Plus-X Dual IP-8 설치 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Burk Plus-X Dual IP-8에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burk Plus-X Dual IP-8 11 페이지.

Software Configuration

Now that the Plus-X Dual IP-8 Adapter is installed on the network, you are ready to add the unit to the

ARC Plus using AutoLoad Plus. AutoLoad Plus is included with the ARC Plus, and may also be

downloaded from www.burk.com.

Configuration involves:



Adding the Plus-X Dual IP-8 Adapter unit to the ARC Plus



Mapping Plus-X Dual IP-8 Adapter channels to unused ARC Plus channels



Importing settings from your ARC-16 (optional)

Adding the Plus-X Dual IP-8 Adapter to the ARC Plus

In order for the ARC Plus to recognize the Plus-X Dual IP-8 Adapter, the Plus-X Dual IP-8 Adapter must

be added to the site:

1. Open AutoLoad Plus and connect to the ARC Plus site to which you are adding the Plus-X Dual

IP-8 Adapter.

2. From the Edit menu, select Plus-X Devices to open the Plus-X device configuration dialog.

3. Click Add to add the Plus-X Dual IP-8 Adapter to the site.

4. AutoLoad Plus will prompt you to select the device type. Select Plus-X Dual IP-8 Adapter. You

may optionally change the description for the Plus-X device. The description appears in

AutoLoad Plus to identify each Plus-X device.

5. Enter the IP address and port number of the Plus-X Dual IP-8 Adapter. These should be the

same settings you used when you configured the Plus-X Dual IP-8 Adapter via the web.

Plus-X Dual IP-8 Adapter Installation and Operation Manual Rev. B

Adding a Plus-X device in AutoLoad Plus