Burk Plus-X Dual IP-8 설치 및 운영 매뉴얼 - 페이지 8

{카테고리_이름} Burk Plus-X Dual IP-8에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burk Plus-X Dual IP-8 11 페이지.

6. Check the Map default set of channels box if you wish to automatically add the Plus-X Dual IP-

8 Adapter channels to the ARC Plus (recommended). The ARC Plus must have 16 consecutive

unused channels, including the starting channel.

7. Click OK.

Note: The above instructions are for AutoLoad version 2.3 or above. Earlier versions vary slightly in

appearance and labeling only.

Manually Mapping Plus-X Dual IP-8 Adapter Channels

If desired, you may manually map Plus-X Dual IP-8 Adapter channels to ARC Plus channels in AutoLoad

Plus by selecting the Meter Channels, Status Channels or Commands tab, as appropriate:

1. Within any of these tabs, click the Source button to configure a channel to use a Plus-X device

channel as its source.

2. When the Source dialog appears, select Plus-X channel and choose the Plus-X device from the

list.

3. Select the Plus-X Dual IP-8 Adapter channel you wish to use.

4. Click OK.

Once mapped, each Plus-X Dual IP-8 Adapter channel will appear on the front panel of the ARC Plus, in

AutoPilot, on the ARC Plus web page, and will be accessible via the ESI.

Plus-X Dual IP-8 Adapter Installation and Operation Manual Rev. B

Overriding channels in AutoLoad Plus