Miele VACUUM CLEANER S183 POWERHOUSE FULLSIZE S184 POWERHOUSE UPRIGHT 사용 설명서 - 페이지 7

{카테고리_이름} Miele VACUUM CLEANER S183 POWERHOUSE FULLSIZE S184 POWERHOUSE UPRIGHT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele VACUUM CLEANER S183 POWERHOUSE FULLSIZE S184 POWERHOUSE UPRIGHT 13 페이지. Miele vacuum cleaner model s183, s184 operating manual

페이지 인쇄
Miele VACUUM CLEANER S183 POWERHOUSE FULLSIZE S184 POWERHOUSE UPRIGHT 사용 설명서
H) BAG CHANGE INDICATOR
The bag change indicator located on the
front of your cleaner normally indicates
when the dust bag should be changed. In
order to maintain the best efficiency, it
should be changed when the yellow mark
appears in the window.
NOTE: if the yellow mark appears after the
bag has been replaced, check to see if the
hose or suction tube is clogged (see
BLOCKAGES). Due to the smaller intake,
the yellow mark may also appear when
using the crevice tool.
CAUTION: DISCONNECT THE CLEANER FROM THE OUTLET BEFORE
PERFORMING THE OPERATIONS BELOW
I) REPLACING THE DUST BAG
1) Remove
the
dust
cover by pulling it
forwards.
NOTE: If the dust bag is installed incorrectly,
the dust cover will not close.
We recommend the use of genuine Miele dust bags only
Yellow
mark
Bag change
indicator
2) Grip the handle of the
dust bag and pull the
bag out of the dust
compartment.
Part # 5294740 Type Z
3) Close dust bag tab to
avoid dust leakage
and put it away.
7
4) Install the new dust
bag by placing the
hole over the exhaust
port and pressing it
into place as shown.
IMPORTANT:
For
maximum vacuum
efficiency, dust bags
should be changed
regularly.