Miele VACUUM CLEANER S183 POWERHOUSE FULLSIZE S184 POWERHOUSE UPRIGHT 사용 설명서 - 페이지 9
{카테고리_이름} Miele VACUUM CLEANER S183 POWERHOUSE FULLSIZE S184 POWERHOUSE UPRIGHT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele VACUUM CLEANER S183 POWERHOUSE FULLSIZE S184 POWERHOUSE UPRIGHT 13 페이지. Miele vacuum cleaner model s183, s184 operating manual
페이지 인쇄
- 1. Operating Instructions
- 2. Important Safety Instructions
- 3. Identification of Main Parts
- 4. How to Assemble / Operate Your Cleaner
- 5. Handle Assembly
- 6. Power Cord Storage
- 7. On/Off Switch
- 8. How to Use the Accessories
- 9. Bag Change Indicator
- 10. Replacing the Dustbag
- 11. Changing Filters
- 12. Troubleshooting Guide
- 13. Maintenance for the Beater Bar
- 14. Servicing and Repairs
- 15. Storing the Appliance
IMPORTANT NOTE: Before replacing any part always,
DISCONNECT THE CLEANER FROM THE ELECTRICAL SUPPLY.
BLOCKAGES
If your cleaner stops picking up dust, or the Bag Change Indicator shows "Full" while the dust bag
is still empty, a blockage may have occurred.
To remove the obstruction, proceed as follow:
Remove the hose from the suction inlet by turning the hose to the right and pulling it out (Fig. 1). Clear any
obstruction from the hose and/or suction inlet using a blunt instrument, taking care not to damage the hose.
If the obstruction occurs in the suction pipe, it can be removed with care as shown in Fig. 2.
MAINTENANCE FOR THE BEATER BAR
DO NOT USE YOUR FINGERS OR HANDS TO
REMOVE OR CLEAN THE BEATER BAR.
Fig. 1
When it is necessary to remove thread, string, hair
etc., which has wound around the beater bar, cut
across them with a pair of scissors, making sure
not to cut the brush.
9
Suction pipe inlet
Fig. 2