ALLN-1 2k20 Mini Edt. 조립 지침 매뉴얼 - 페이지 5
{카테고리_이름} ALLN-1 2k20 Mini Edt.에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLN-1 2k20 Mini Edt. 10 페이지.
페이지 인쇄
2.
Secure together using (2) 2 ½" inch nuts and bolt, into the vertical
holes of Hex Plate.
3.
Place Vertical Runner onto the sleeve of the Horizontal Runner
Bar
4.
Secure together using (2) 3"inch bolts and female knobs, into the
horizontal holes of Hex Plate
5.
Repeat for both sides.
This is also shown in the online video..
STEP 7: ATTACHING THE VERTICLE RUNNER (Short)
1.
Locate the 7" Perf. Tubing and remaining Hex Plates
2.
Repeat all the instructions from Step 6, to assemble and attach
the Vertical Runners (Short) to the second sleeve on the
Horizontal Runner.
3.
Repeat for both sides.
This is also shown in the online video.
STEP 8: ATTACHING THE VERTICLE RUNNER (Short)