ALLN-1 2k20 Mini Edt. Instrukcja montażu - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Sprzęt fitness ALLN-1 2k20 Mini Edt.. ALLN-1 2k20 Mini Edt. 10 stron.
Drukuj stronę
2.
Secure together using (2) 2 ½" inch nuts and bolt, into the vertical
holes of Hex Plate.
3.
Place Vertical Runner onto the sleeve of the Horizontal Runner
Bar
4.
Secure together using (2) 3"inch bolts and female knobs, into the
horizontal holes of Hex Plate
5.
Repeat for both sides.
This is also shown in the online video..
STEP 7: ATTACHING THE VERTICLE RUNNER (Short)
1.
Locate the 7" Perf. Tubing and remaining Hex Plates
2.
Repeat all the instructions from Step 6, to assemble and attach
the Vertical Runners (Short) to the second sleeve on the
Horizontal Runner.
3.
Repeat for both sides.
This is also shown in the online video.
STEP 8: ATTACHING THE VERTICLE RUNNER (Short)