Miele F 1811 SF 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} Miele F 1811 SF에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele F 1811 SF 24 페이지. Miele f1811sf / f1801sf freezer - product and cut-out dimensions
Miele F 1811 SF에 대해서도 마찬가지입니다: 치수 (2 페이지), 제품 치수 (3 페이지), 작동 및 설치 지침 (26 페이지)
페이지 인쇄
en
. . . with partition
The minimum thickness of the partition
5
is
/
" (16 mm).
8
If there is a partition with a thickness
5
from
/
" (16 mm) to 6
8
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
Installing the heating mat will
increase energy consumption.
4
5
/
" (160 mm)
16
When finding the dimensions for the
partition in model 4, note the thickness
of the custom door panels and the door
handles. This will prevent damage to
the doors if they are opened at the
same time.
Required accessories and
tools
To connect a side-by-side
combination, you will need a
Top-frame, which can be obtained
from Miele.
Tools
– T 20 Torx screwdriver
– T 20 Torx bit + magnetic holder
– Adjustable wrench
Other
– Various bit sizes, suitable for material
– Piece of thin material (for example,
linoleum) to protect the floor from
damage
– Adhesive tape