Miele F 1811 SF Handleiding voor installatie-instructies - Pagina 4
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Miele F 1811 SF. Miele F 1811 SF 24 pagina's. Miele f1811sf / f1801sf freezer - product and cut-out dimensions
Ook voor Miele F 1811 SF: Afmetingen (2 pagina's), Productafmetingen (3 pagina's), Bedienings- en installatie-instructies (26 pagina's)
Pagina afdrukken
en
. . . with partition
The minimum thickness of the partition
5
is
/
" (16 mm).
8
If there is a partition with a thickness
5
from
/
" (16 mm) to 6
8
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
Installing the heating mat will
increase energy consumption.
4
5
/
" (160 mm)
16
When finding the dimensions for the
partition in model 4, note the thickness
of the custom door panels and the door
handles. This will prevent damage to
the doors if they are opened at the
same time.
Required accessories and
tools
To connect a side-by-side
combination, you will need a
Top-frame, which can be obtained
from Miele.
Tools
– T 20 Torx screwdriver
– T 20 Torx bit + magnetic holder
– Adjustable wrench
Other
– Various bit sizes, suitable for material
– Piece of thin material (for example,
linoleum) to protect the floor from
damage
– Adhesive tape