Miele F 24 1 Vi Series 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Miele F 24 1 Vi Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele F 24 1 Vi Series 20 페이지. Side-by-side kit ksk 2002

en - Securing a side-by-side combination

. . . with partition wall

The wall a between the side-by-side

appliances must be at least

5/8" (16 mm) thick.

If the door hinges of the refigeration

appliances are next to each other,

you must take into account the thick-

ness of the cabinet fronts and door

handles so that the appliance doors

do not collide and become damaged

if they are opened at the same time.

If the partition wall a is narrower than

6 5/16" (160 mm), you will need the

side panel heater  from the side-by-

side merging kit to prevent condensa-

tion from forming and any resulting

damage (see section "Installing the side

panel heater").

The side panel heater  is attached to

the right side of the appliance that is on

the left (when seen from the front).

When planning niches, please note

that the niche into which the appli-

ance with the side panel heater  is

installed must be

1/8"-1/4" (3–5 mm) wider.

Connecting the side panel heater

leads to higher energy consumption.