Miele K 11820 SD 작동 및 설치 지침 - 페이지 10

{카테고리_이름} Miele K 11820 SD에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 11820 SD 48 페이지. Refrigerator with dynamiccooling
Miele K 11820 SD에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (48 페이지), 작동 및 설치 지침 (44 페이지)

페이지 인쇄

Warning and Safety instructions

The more coolant there is in an appliance, the larger the room it

should be installed in. In the event of a leakage, if the appliance is in

a small room, there is the danger of combustible gases building up.

For every 8 g of coolant at least 1 m

amount of coolant in the appliance is stated on the data plate inside

the appliance.

Before connecting the appliance to the mains supply, make sure

that the rating on the data plate corresponds to the voltage and

frequency of the household supply. This data must correspond in

order to avoid risk of damage to the appliance.

Consult a qualified electrician if in any doubt.

The electrical safety of this appliance can only be guaranteed

when continuity is complete between it and an effective earthing

system which complies with local and national safety regulations. It

is most important that this basic safety requirement is present and

tested regularly and, where there is any doubt, the household wiring

system should be inspected by a qualified electrician.

If the connection cable is faulty, it must only be replaced by a

Miele approved service technician to protect the user from danger.

Do not connect the appliance to the mains electricity supply by a

multi-socket unit or an extension lead. These do not guarantee the

required safety of the appliance (e.g. danger of overheating).

If moisture gets into electrical components, it could cause a short

circuit.

Therefore, do not operate this appliance in areas which are exposed

to moisture.

This appliance must not be installed and operated in mobile

installations (e.g. on a ship).

of room space is required. The