Miele K 11820 SD Instruções de utilização e de instalação - Página 10
Procurar online ou descarregar pdf Instruções de utilização e de instalação para Frigorífico Miele K 11820 SD. Miele K 11820 SD 48 páginas. Refrigerator with dynamiccooling
Também para Miele K 11820 SD: Manual de operação e instalação (48 páginas), Instruções de utilização e de instalação (44 páginas)
Warning and Safety instructions
~
The more coolant there is in an appliance, the larger the room it
should be installed in. In the event of a leakage, if the appliance is in
a small room, there is the danger of combustible gases building up.
For every 8 g of coolant at least 1 m
amount of coolant in the appliance is stated on the data plate inside
the appliance.
~
Before connecting the appliance to the mains supply, make sure
that the rating on the data plate corresponds to the voltage and
frequency of the household supply. This data must correspond in
order to avoid risk of damage to the appliance.
Consult a qualified electrician if in any doubt.
~
The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system which complies with local and national safety regulations. It
is most important that this basic safety requirement is present and
tested regularly and, where there is any doubt, the household wiring
system should be inspected by a qualified electrician.
~
If the connection cable is faulty, it must only be replaced by a
Miele approved service technician to protect the user from danger.
~
Do not connect the appliance to the mains electricity supply by a
multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).
~
If moisture gets into electrical components, it could cause a short
circuit.
Therefore, do not operate this appliance in areas which are exposed
to moisture.
~
This appliance must not be installed and operated in mobile
installations (e.g. on a ship).
10
3
of room space is required. The