Miele CS 1012 작동 및 설치 지침 - 페이지 18

{카테고리_이름} Miele CS 1012에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1012 44 페이지. Gas combiset

Miele CS 1012 작동 및 설치 지침

Frequently asked questions

,
Repairs should only be carries out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
The burner does not ignite when the combiset is being used for the first
time or after an extended period of not being used.
Possible fault
There could be air in the gas pipe.
The On/Off and residual heat indicators are flashing.
Possible fault
There has been a power failure.
The On/Off indicator is flashing.
Possible fault
The gas supply has been cut-off.
18
Solution
You may need to make several
attempts before the burner ignites
successfully.
Solution
Turn all the controls clockwise to "ß".
You can now operate the appliance as
normal.
Solution
– Turn all the controls clockwise to
position "ß". You can now operate the
appliance as normal.
– If the problem persists, disconnect
the appliance from the electrical
supply for a few seconds.