Miele KM 406 설치 지침 매뉴얼 - 페이지 20

{카테고리_이름} Miele KM 406에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KM 406 40 페이지. Gas cooktop
Miele KM 406에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 치수 매뉴얼 (1 페이지), 설치 지침 매뉴얼 (20 페이지), 사용 설명서 (28 페이지), 사용 설명서 (24 페이지), 사용 설명서 (20 페이지), 설치 지침 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (20 페이지), 설치 지침 매뉴얼 (40 페이지)

페이지 인쇄
Miele KM 406 설치 지침 매뉴얼
Installation KM 414 / KM 417

Fixing the support brackets

^ Position the two support brackets
supplied a in the positions shown in
"Fitting the spacer bars and support
brackets" so they are flush with the
top edge of the cut-out and secure
using the 3.5 x 25 mm screws
supplied. 2 screws are needed to
secure each support bracket.
The thickness of the worktop will
determine which drill hole is used.
20

Granite worktops

On a granite worktop a hole must be
drilled d at the position indicated to
secure each support bracket.
^ Using a piece of strong, double-
sided adhesive tape position the
support brackets supplied a at the
positions indicated flush with the top
edge of the worktop and secure each
bracket with one screw in hole d as
shown.

Building in the gas hob

^ Place the gas hob in the prepared
cut-out.
^ Feed the electricity connection cable
through the cut-out and connect.
^ Make the gas connection.
(see relevant section).
^ Secure the gas hob from below
through the middle elongated hole b
in each support bracket using the
four screws supplied. Carefully adjust
the hob if necessary.