Miele KM 406 Handleiding voor installatie-instructies - Pagina 20

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Miele KM 406. Miele KM 406 40 pagina's. Gas cooktop
Ook voor Miele KM 406: Gebruiksaanwijzing (20 pagina's), Dimension Handleiding (1 pagina's), Handleiding voor installatie-instructies (20 pagina's), Gebruiksaanwijzing (28 pagina's), Gebruiksaanwijzing (24 pagina's), Gebruiksaanwijzing (20 pagina's), Handleiding voor installatie-instructies (28 pagina's), Handleiding voor installatie-instructies (20 pagina's), Handleiding voor installatie-instructies (40 pagina's)

Pagina afdrukken
Miele KM 406 Handleiding voor installatie-instructies
Installation KM 414 / KM 417

Fixing the support brackets

^ Position the two support brackets
supplied a in the positions shown in
"Fitting the spacer bars and support
brackets" so they are flush with the
top edge of the cut-out and secure
using the 3.5 x 25 mm screws
supplied. 2 screws are needed to
secure each support bracket.
The thickness of the worktop will
determine which drill hole is used.
20

Granite worktops

On a granite worktop a hole must be
drilled d at the position indicated to
secure each support bracket.
^ Using a piece of strong, double-
sided adhesive tape position the
support brackets supplied a at the
positions indicated flush with the top
edge of the worktop and secure each
bracket with one screw in hole d as
shown.

Building in the gas hob

^ Place the gas hob in the prepared
cut-out.
^ Feed the electricity connection cable
through the cut-out and connect.
^ Make the gas connection.
(see relevant section).
^ Secure the gas hob from below
through the middle elongated hole b
in each support bracket using the
four screws supplied. Carefully adjust
the hob if necessary.