ALLNIC AUDIO A-2500 소유자 매뉴얼 - 페이지 6

{카테고리_이름} ALLNIC AUDIO A-2500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO A-2500 14 페이지. 211/845 single-ended triode monoblock power amplifiers

페이지 인쇄

(It is optional to leave the "O" rings on the small tubes; some prefer the sound with the O

rings on).

• Disconnect the power cord by pulling the plug, not the cable.

• Do not attempt any repairs. Do not remove the unit's chassis cover without specific

authorization from your Allnic dealer.

• Keep the power cord away from heat sources

• Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.

CLEANING

Chassis and glass

Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the

faceplate, chassis and tube chimneys of the A-2500s.

Connectors

You may use any good quality contact cleaner recommended for such applications to clean the contacts

from time to time, as you deem appropriate.

INITIAL SET-UP

LOCATION, LOCATION, LOCATION

Like all audio products using tubes, the Allnic Audio A-2500s need to be placed on a solid stand in a

location that provides good air circulation around, above and below the monoblocks.

• DO NOT cover the tops of the A-2500s.

• DO NOT place the A-2500s on carpet or foam.

• DO NOT subject the A-2500s to knocks and shocks as you move them around. This advice is meant

particularly for those who may want to place the A-2500s on some kind of after-market isolation

feet or similar devices. Dropping one side of the A-2500s, or the whole of a unit may cause damage

and may void the warranty.

• DO NOT place the unit near a strong light or heat source.

• DO NOT place anything heavy on the unit.

• DO NOT allow rubber or vinyl materials to rest on the chassis for long periods of time. This could

discolour the metal.

• DO place the A-2500s on a shelf or stand that is stable and not subject to vibration or sudden

shock.

• DO consider using a high-quality power cord, inter-connects and speaker cables. The A-2500s are

highly sensitive electronic devices designed for neutrality and will output what you put into them.

Allnic's ZL (Zero Loss) Technology power and interconnect cables will work synergistically with the

A-2500s.

• DO try to place A-2500s away from major sources and potential receivers of RFI and EMI.

Though well shielded, the A-2500s will function best away from large power transformers and