ALLNIC AUDIO H-3000 소유자 매뉴얼 - 페이지 5

{카테고리_이름} ALLNIC AUDIO H-3000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO H-3000 14 페이지. Phono stage
ALLNIC AUDIO H-3000에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)

페이지 인쇄

1. Tubes

construction of phono stage amplifiers. However,

Allnic Audio manufactures a high quality LCR RIAA unit

and has developed a 600 ohms impedance matching

method.



The H-3000 Phono Stage is all transformer

coupled.



No negative feedback design with only two gain

stages



For superior signal to noise ratios, the H-3000 is

equipped with pure vacuum tube, high speed,

automatic voltage regulation for each channel and

a power supply unit separate from the phono

stage itself.



High quality MC Step-up Transformers with

Permalloy cores are used for the H-3000's dual MC

inputs.



New vacuum tube damping technology – Allnic

Audio's patented "Absorb GEL tube damper"

technology prevents harmful vibrations from

reaching the signal / gain tubes and, therefore,

prevents micro-phonic noise propagation in the

tubes. The Allnic Audio Absorb Gel damper

technology effectively solves a problem that

plagues most tube amplification systems. Provided

other tube components do not introduce micro-

phonic noise into your system, with the Absorb Gel

damping system, you will enjoy a degree of

transparent sound that will surprise and please

you.



Pure Class A operation



Pure balanced operation



As are all Allnic Audio products, the H-3000 is fully

RoHS (EU Reduction of Hazardous Substances

regulation) compliant in construction and materials

WHAT'S IN THE BOX?

Please check that the shipping box contains the

following:



One (1) Allnic H-3000 phono stage – in natural

aluminum or black, depending on your order

specification



One (1) Power Supply for H-1500 II/H-3000– in

natural aluminum or black, depending on your

order specification



One (1) power umbilical cord



One (1) IEC type power cord



One (1) Owner's Manual

Note:

The H-3000 and its power supply ship with the

tubes installed.

The H-3000 power supply will work with most IEC

type aftermarket power cords. Of course, only you

can determine the power cord that works most

synergistically with the H-3000 in your system.

Be sure the H-3000 power supply unit is labeled

for the AC voltage of your location. If it is not,

please contact Hammertone Audio.

We advise that you keep the boxes and other packing

materials that your H-3000 came in. It will be useful if you

sell your H-3000 or in the unlikely event you need to ship it

or the power supply for service.

SAFETY



Remove ALL protective cushioning material inside

the tube chimneys before operation. The tube

chimneys should contain NOTHING except the

tubes.



Disconnect the power cord by pulling the plug, not

the cable.



Do not attempt any repairs. Do not remove the

units' chassis covers without specific authorization

from Hammertone Audio.



Keep the power cords away from heat sources



Keep the units away from liquids – do not allow

any liquid to enter the interior of the units.



When the units are moved from a cold to a warm

environment, allow sufficient time for any condensation

to evaporate in both units before plugging the power

supply unit into an AC connection.



Do not attempt any repairs.



Do not remove the units' chassis covers without specific

authorization from Hammertone Audio.



See the notes on "Location, Location, Location".

CLEANING

Chassis

Use only a soft, lint-free cloth dampened slightly with water

only (NO cleaning fluids!) to clean the faceplate and chassis

of the H-3000 and its power supply.