DIAKAT BF-410 운영자 매뉴얼 - 페이지 10

{카테고리_이름} DIAKAT BF-410에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIAKAT BF-410 11 페이지.

BF-410

Floor grinder

* Application of slight pressure on the handlebars towards the ground will cause moving of the machine to

the left

* slight lifting of the handlebars will cause moving of the machine to the right.

* slight tilting of the machine to the left will cause moving of the machine to the front

* slight tilting of the machine to the right will cause the machine to move back

4.3. Switching of the machine

When the safety switch leaver is released (even accidentally) the circuit is broken and the machine will stop.

The basic steps of preventive maintenance described in this manual can be carried out by the operator

appointed by the entrepreneur. We recommend that all repairs and adjustments beyond the scope of this

manual are carried out by authorised service centre.

!ATTENTION! In the guarantee period it is prohibited to interfere with the motor and power transmitting

components in any manner whatsoever!

Before commencing work visually check if the machine complete and do not show any signs of damage.

Check the tightness of screw joints and locking leavers before every start of the machine. Regularly check

the tightness of quick lock tool carrier screws.

Regular cleaning prolong the life of the machine its components and tools. After finishing work clean the

machine from dust and dirt by wet cloth or air before storing. Never use pressurised water for cleaning.

Strana 9