DIAKAT BF-410 운영자 매뉴얼 - 페이지 11

{카테고리_이름} DIAKAT BF-410에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIAKAT BF-410 11 페이지.

BF-410

Floor grinder

CONDITIONS OF GUARANTEE

Diakat machines are designed and manufactured to withstand the toughest working conditions and still

remain safe, defect free and long-lasting. The following conditions are the same for the whole Diakat range

of products.

If not otherwise agreed the manufacturer guarantees all his products for 24 months from the date of the

delivery to the end user, under the condition that the first year paid service inspection is carried out. This

guarantee service inspection must take place in between 10 to 12 month from date of sale. If this condition is

not fulfilled the guarantee is 12 months.

If within the period of the guarantee a defect caused by faulty design, material or manufacturing process

occurs, the manufacturer will at his discretion remedy it by repair or replacing the faulty part.

The guarantee do not cover consumer and fast wearing parts such as air filters, spark plugs, V belts, cable

wires, rubber covers etc.

The guarantee also do not cover faults or damages caused by not abiding to the instructions contained in the

Operators manual, unskilled use, use of the machine for other work than for which it is designed,

unauthorised service interference, faulty or inadequate maintenance, use of improper fuel or lubricants,

accident or act of God.

Furthermore the manufacturer can not be held responsible for damages occurring during transport or storage.

1. The guarantee applies only to the end purchaser stated on the guarantee certificate.

2. The guarantee applies only to those parts of the equipment which demonstrates faulty material or

manufacturing process and only for the period of 12 months from the date of sale shown on the guarantee

certificate.

3. The Guarantee do not apply to wear parts such as rubber wheels, carbon brushes etc.

4. The Guarantee covers expenses incurred in order to repair or replace parts of the equipment that

demonstrates faulty material or manufacturing process within the period of 12 months from the date of

sale. Other expenses linked to the repair such as travelling, down time etc. are not covered.

5. The Guarantee period is extended by the eventual period of guarantee repair.

6. The Guarantee do not apply to the following:

- faults or damages caused by not abiding to the instructions contained in the Operators manual

- faults or damages caused by faulty or inadequate maintenance

- faults or damages caused by unauthorised interference with the equipment structure

- faults or damages caused by the use of other then recommended spare parts

- faults or damages caused by the use of the equipment for purpose other than for which it was designed

7. The supplier is reserving the right to asses the fault of a part or whole of the equipment. If necessary the

supplier can request the part for assessment.

8. For eventual Guarantee claim it is necessary to produce the Guarantee certificate or relevant invoice.

Any other guarantees except those mentioned above do not apply to the equipment.

Strana 10