Alloy POEFE8TV3 사용자 설명서 - 페이지 7

{카테고리_이름} Alloy POEFE8TV3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alloy POEFE8TV3 13 페이지. Fast ethernet poe+ unmanaged switch

3.1 Installation Method

The site where you install the switch may greatly affect its performance. When installing,

please take the following into consideration.

Install the switch in a cool, dry place. See technical specifications for the acceptable

temperature and humidity operating ranges.

Install the switch on a secure, level surface that can support its weight, at least 5Kg.

Before connecting the Power Cord please ensure the appropriate voltage switch is

set, this switch can be found at the back of the POEFE8TV3.

Leave at least 10cm of space at the front and rear of the switch to ensure adequate

ventilation.

When installing the switch on a shelf or desktop please ensure guidelines above are

followed, including level surface and adequate ventilation.

Rubber feet are supplied and can be applied to the bottom of the switch, please see diagram

below:

The POEFE8TV3 is a rack mountable switch and can be installed in an EIA-19 based

equipment rack. First install the provided rack mount brackets onto each side of the switch

using the screws provided. Using the screws provided with your rack mount the switch into

your equipment rack.

Fig. 1 Desktop installation

POEFE8TV3 User Manual