Alloy Home MH4 매뉴얼 - 페이지 3

{카테고리_이름} Alloy Home MH4에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alloy Home MH4 12 페이지. Electrical heating thermostat

INSTALLATION & WIRING

Location: Indoor installation recommended, approximately 4.5' to 5' above the floor so as

to accuratley asses the average room temperature. It should be away from direct sunlight,

any cover or any heat source to avoid an inaccurate reading for temperature control.

CAUTION: Cut off power supply at circuit breaker or fuse before installation to avoid fire, shock or death!

Step 1: Separate the device with a flat-head screwdriver into two parts: the display panel

and the bottom case.

Step 2: Insert all wires into the right terminals and tighten screws. Wiring diagram is

shown below.

Step 3: Push the bottom case into the junction box and secure it with two screws, and

then mount the touch panel back.

Step 4: Confirm the device is well mounted, power on and it is ready to operate.