Alloy Home MH4 Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Thermostat Alloy Home MH4 herunter. Alloy Home MH4 12 Seiten. Electrical heating thermostat

INSTALLATION & WIRING

Location: Indoor installation recommended, approximately 4.5' to 5' above the floor so as

to accuratley asses the average room temperature. It should be away from direct sunlight,

any cover or any heat source to avoid an inaccurate reading for temperature control.

CAUTION: Cut off power supply at circuit breaker or fuse before installation to avoid fire, shock or death!

Step 1: Separate the device with a flat-head screwdriver into two parts: the display panel

and the bottom case.

Step 2: Insert all wires into the right terminals and tighten screws. Wiring diagram is

shown below.

Step 3: Push the bottom case into the junction box and secure it with two screws, and

then mount the touch panel back.

Step 4: Confirm the device is well mounted, power on and it is ready to operate.