ALLpaQ Packaging Group Genesis 250 C 운영자 사용 설명서 - 페이지 12

{카테고리_이름} ALLpaQ Packaging Group Genesis 250 C에 대한 운영자 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLpaQ Packaging Group Genesis 250 C 13 페이지.

Once the tubing has been fed through, the white disc will locate in the bottom drain hole of the

base unit (Fig 4.2).

Bag ﬁlling can commence in according to manufacturers recommendations. ALLpaQ recommend

foam dunnage for all shipping containers (see 2:4 Fig 4.5)

3.5 Fitting the lid

Hold the lid against the panel (Fig 5.1). Simply lower the lid until it is located across all four

corners of the container (Fig 5.3). Always lock the lid to a fully erected container.

Fig 5.1

3.6 Moving the container to storage area

Please refer to instruction 3.1

3.7 Emptying the container

Move container into position in line with previous instructions (see 3.1).

3.8 Removing the lid

When removing the lid please refer to instruction 3.2

3.9 Connect bag outlet

ALLpaQ 250. Open the front base access door by sliding door to the centre of the unit. (Fig 9.1)

Fig 5.2

Fig 5.3

ALLpaQ 200E by opening the hinged door. (Fig 9.1 inset)

Bag outlet tubing can be pulled and connected according to

bag suppliers recommendations. (Fig 9.2 and 9.2 inset)

Fig 9.1

Manual V1 - (Sept 14

Ensure the yellow catches are in the

open position before attempting to ﬁt the

lid to the container. (Fig 5.2)

Once the lid is on the container return the

yellow catches to the locked position. (Fig

5.3)

2012)