ALLpaQ Packaging Group Genesis 500 운영자 사용 설명서 - 페이지 6

{카테고리_이름} ALLpaQ Packaging Group Genesis 500에 대한 운영자 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLpaQ Packaging Group Genesis 500 13 페이지.

Once the panel has been released allow the panel to be lowered into the box using both hands.

Fig 11.5

1.12 Moving the container to storage area.

Please refer to instruction point 1.6 (refer to Fig 6.1 and 6.2).

Chapter 2 - ALLpaQ Genesis 1000 operational Instructions

2.1 Moving the Container

As with the ALLpaQ Genesis 500L container the pallet base allows for 4 way entry (Fig 1.2) when

using a pallet jack or fork lift truck. Material handling equipment using forks which lift from the legs

must use the 2 way entry front and rear (Fig 1.1).

Repeat the procedure with the opposite short panel.

Fig 11.3

The lid should then be ﬁtted to the folded container.

Note that the red locking catches may be in the locked

position before operation. (Fig 11.5).

Fig 1.1

Manual V1 - (Sept 14

Starting with either of the

remaining long sided panels,

Fig 11.4

lower the panel folding towards

the centre (Fig 11.3).

Repeat the process for the last

side panel ( Fig 11.4)

2012)

Fig 1.2