AllPondSolutions PF-8000 매뉴얼 - 페이지 15
{카테고리_이름} AllPondSolutions PF-8000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AllPondSolutions PF-8000 19 페이지. Pressurised pond filter, bio-mechanical filtration, built in steriliser, large filter volume, pressurised closed system, simple user friendly operation
페이지 인쇄
3. Reduce feeding. Overfeeding introduces a lot of organic waste and is one of
the main causes for cloudy water problems.
4. Make sure to perform regular water changes, check your unit is clean and
adequate for your pond size and do not overstock it.
My filter is leaking
1. Check that the inlet/outlet caps and O-ring have been correctly assembled
and that they are hand tight. Ensure the O-rings are intact, well lubricated and
not twisted or damaged.
2. Always secure the inlet hose and outlet hose with a jubilee clip.
3. If you find that the unit is still leaking after the above checks or there is an
obvious casing crack, you will need to replace the body casing on the unit.
My Unit is Cutting Out
1. Rinse unit's foams making sure they are free of debris.
2. Inspect the quartz sleeve for hair line cracks and ensure that all O-rings are
in place and well lubricated.
If none of the above resolves your issue, or you require spare parts for your
filter, please contact the supplier of your unit.