AllPondSolutions 3000PP 매뉴얼 - 페이지 8

{카테고리_이름} AllPondSolutions 3000PP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AllPondSolutions 3000PP 13 페이지. Pond & aquarium

O-rings
It is vital that O-rings are regularly inspected and replaced as the rubber
watertight seal will perish over time, which may cause your unit to leak. Before
replacing your o-rings, ensure they are well lubricated to ensure the seal is
kept water tight.
Pump Maintenance
IMPORTANT!
Failure to carry out routine maintenance and/or leaving the pump
with reduced/no flow rate for long periods will result in a shorter pump life and
will invalidate the warranty.
It is recommended to disconnect your pump and clean the impeller and
pipework monthly. Pipework will become blocked with waste and protein slime
over time, so regular cleaning is important for optimal performance.
The frequency of how often you will need to clean and inspect your unit of
course will depend on a lot of factors like how dirty the water is when you first
start using your pump, your pond volume and also how many fish you have.
How often you feed your fish and seasonal light levels will also affect how
quickly your pond water gets dirty and will need to be taken into consideration
when planning how often to clean your PP unit.
Front cover - can be removed by gently depressing
the push clips located on either side. Wash through
the cover to remove any debris.
Impeller - unscrew a single screw fixing located on
top of the impeller cover. Turn it anti-clockwise and
pull away from the body.