AllPondSolutions WF-20000 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} AllPondSolutions WF-20000에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AllPondSolutions WF-20000 10 페이지. Floating fountain pump

General Maintenance

IMPORTANT!

Failure to carry out routine maintenance and/or leaving the pump

with reduced/no ﬂow rate for long periods will result in a shorter pump life and

will invalidate the warranty. It is recommended to disconnect your pump and

clean the impeller and pipework monthly.

Disconnect the mains electricity supply before attempting any installation /

maintenance of any kind.

1. Unﬁx the pegs and take the unit out of water.

2. Hold the main part of the water pump with one hand and rotate the buoy

counterclockwise with the other hand to separate the two.

3. Rotate the unit's body counterclockwise and remove the ﬁxing frame.

4. Push the lock clip and rotate along the joint to separate the water ﬁlter cover

from the lower shell of the main body.

5. Loosen two screws (as shown in the image below) to access the impeller.

Ensure that the plastic propeller part of the impeller is attached to the ceramic

part and that they have not come apart or split. If this is the case you need to

replace your impeller. Wash parts with fresh water carefully.

6. Clean it carefully under running water.

7. Re-assemble.