AllPondSolutions CUV-155 매뉴얼 - 페이지 8

{카테고리_이름} AllPondSolutions CUV-155에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AllPondSolutions CUV-155 17 페이지. Pond & aquarium uv steriliser

O-rings

It is vital that O-rings are regularly inspected and replaced as the rubber

watertight seal will perish over time, which may cause your unit to leak. Before

replacing your o-rings, ensure they are well lubricated to ensure the seal is

kept water tight.

General Maintenance

It is recommended that every 2-3 months you perform maintenance on your

CUV unit. This is necessary to prevent blockage and inspect the bulb and

quartz sleeve. Make sure to inspect the unit's cable for damage or excessive

wear.

IMPORTANT!

Disconnect mains electricity supply before handling or

attempting maintenance.

Quartz sleeve & UV bulb - to access UV bulb unfasten the clip located on the

side (CUV-155 model only). Gently rotate the housing to remove it.

CUV-118 / 136 / 172

CUV-155

The quartz sleeve can be coated in limescale build up in hard water areas. This

should be carefully removed from the quartz sleeve and cleaned with a soft

damp cloth.

Clean body and all attachments. Reassemble.