ALLPOWER SupaSwift 645 BIG BOB 사용 설명서 - 페이지 4

{카테고리_이름} ALLPOWER SupaSwift 645 BIG BOB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLPOWER SupaSwift 645 BIG BOB 10 페이지. 18”, 21”

페이지 인쇄



Under no circumstances operate this machine in an enclosed area as Carbon Monoxide fumes

produced by the engine can be lethal.



Avoid operating this machine over loose stones or gravel surface as debris may deflect from the

discharge area and result in personal injury or property damage.



Ensure mowing area is clear of loose objects that could be thrown by mower blades.



This product is equipped with an internal combustion type engine. DO NOT use unit on or near any

unimproved, forest-covered or brush covered land unless exhaust system is equipped with a spark

arrester meeting applicable local, state or federal laws. Fitment of an approved Spark Arrestor for a

particular area is at cost of, and is the responsibility of the operator. If a spark arrester is used, the

operator must maintain it in effective working order.



Before leaving or transporting the machine, ensure that the engine is turned off and that all moving

parts have come to a complete stop as the blades can continue to rotate for up to 10 seconds after

the engine has been turned off.



Turn off the engine:

- Before clearing blockages or eliminating clogging in the discharge chute.

- If excessive vibration is evident.

- Before refuelling, cleaning, checking, opening the discharge chute, emptying the catcher, fitting or

removing mulching baffle or performing maintenance of any kind.



The blade should be checked regularly for wear, damage and secure mounting. Ensure that all

screws and bolts are always firmly tightened.



Do not operate this machine with worn or damaged blades.



If blades strike an immoveable object, stop the engine and check for damage before proceeding.



Know your controls and learn how to stop the engine quickly in an emergency!



Please observe all safety and warning labels as they are designed for your protection and for the

protection of the machine.



Failure to observe these safety labels may cause serious injury to the operator, bystanders or to the

machine.



Danger and warning labels that have become illegible must be replaced. Your authorised Allpower

Servicing Dealer can supply replacement labels.



Before attempting any maintenance on this machine, ensure the engine is switched OFF, all

moving parts have come to a complete stop and the spark plug lead is disconnected from the spark

plug.



Allow the engine to cool down if maintenance, refuelling, oil change or top-up is required.



Do not change the basic setting of, or over-rev the engine. Excessive speed can cause personal

injury, damage to the machine and will void the Engine Warranty.



If parts or safety guards have been removed for maintenance work, ensure that these are

remounted and secure before the next use.



Use only genuine Supaswift replacement parts. Use of non-genuine or modified components may

cause personal injury or damage to the machine.



Only carry out maintenance work described in these operating instructions. Contact your authorised

Allpower Servicing Dealer for all other work.

Safety Labels

Maintenance

P a g e

| 4