ALLPOWER SupaSwift 645 BIG BOB 사용 설명서 - 페이지 8

{카테고리_이름} ALLPOWER SupaSwift 645 BIG BOB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLPOWER SupaSwift 645 BIG BOB 10 페이지. 18”, 21”

페이지 인쇄

WARNING: AVOID INJURY. Read

and understand the entire Safety

section before proceeding.

Cleaning unit after each use will help prevent fire hazard from dry grass and extend the working

life of the machine. Protect the cutting components against corrosion by applying any good

quality, commercial lubricant such as WD-40 spray lubricant.



Wipe down the engine and outside of the machine with a damp cloth.



Keep blades in good condition. Replace if cutting performance deteriorates over time.



Replace blades and bolts as a full set only. This prevents vibration problems.



Replace blade disc if blade mount holes are worn or cracking is evident.

Warning: Never operate this machine if the blades or blade disc are loose or damaged.



Always inspect wheel bearings for looseness or damage prior to each use replace when worn.



Always inspect machine for any loose, worn or broken components before starting the engine.



Replace engine oil at intervals as specified in the engine manual.



For aspects of servicing not covered by this Operators' Manual, refer to an authorised Allpower Service

Centre.

DANGER: Shut engine down, ensure all

rotating parts have stopped and remove

spark plug lead before commencing

maintenance work.

The blades in this Supaswift Lawn Mower are designed to cut

grass. Drier than normal conditions and foreign objects can

cause more wear. In time, these blades will wear and will

need to be replaced in order to obtain maintain a clean cut on your grass. To replace blades,

follow the procedure set out below:

Ensure that the engine is turned off and that all moving parts have come to a complete stop.

Remove the spark plug lead from the spark plug.

Set height adjuster to position 6-12 (Refer Page 7).

Lower handles toward the ground and place heavy object on handles (refer Image 3).

Remove blade disc or blade by loosening centre-mounting bolts.

Remove blades from disc by loosening mount bolts.

Assembly is reversal of this procedure.

SERVICING INFORMATION

Replacement of Blades

CAUTION: DO NOT touch parts

which are hot from operation.

ALWAYS allow parts to cool.

WARNING: If you are not confident in carrying

out the following maintenance, or have diffi-

culty understanding the instructions, consult an

authorised Servicing Dealer

C AUTION : Blades ar e

sha r p and can cut you. Always

wear gloves, and use extra ca u tion

when servicing them

P a g e

| 8