DiamaPro Systems SVX2-M 소유자 매뉴얼 - 페이지 4
{카테고리_이름} DiamaPro Systems SVX2-M에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DiamaPro Systems SVX2-M 8 페이지. Industrial vacuum
페이지 인쇄11. DESCRIPTION
9
5
3
8
6
4
1.
SUCTION UNIT
2.
ON-OFF SWITCH
3.
ACCESSORIES CONNECTION
4.
WHEELS WITH BRAKE
5.
FILTER CLEANING LEVER
6.
BAG HOLDER
7.
COLLECTION BAG
8.
STRAP LOCKS BAG
9.
ACCESS TO THE PRIMARY FILTER
10. ACCESS TO THE SECONDARY FILTER
12. MOUNTING OF PARTS
Depending on the specific needs of the client, the vacuum cleaner may
include accessories that are not normally supplied in the standard version.
It is necessary to select the suction hose and accessories that are appro-
priate for the type of material that must be sucked into the cleaner.
The machine is now ready for use.
Connect one end of the flexible hose to the desired accessory and the
other with the quick coupling nozzle mounted on the filter chamber. (See
the accessories sheet)
10
2
1
13. USING THE VACUUM CLEANER
7
14. FILTER REPLACEMENT
PRIMARY FILTER REPLACEMENT
1. Disconnect and lift the head. (A)
2. Remove the filter (B)
3. Replace the filter with a proper one for
the vacuum cleaner in use
4. Insert the new filter
5. Hang up the head (A)
C
Before switching ON the vacuum be sure the container is
empty
1
I
0
I - Motor switch ON
O - Switch OFF
SECONDARY FILTER REPLACEMENT
1. Remove the rubber sleeve (C)
D
E
2. If necessary, close the filter with a cap (D)
3. Remove the three screws (E)
4. Remove the filter (F)
5. Replace the filter with a proper one for the
F
vacuum cleaner in use
6. Insert the new filter (F)
7. Fix the filter on the chamber with the 3 screws
8. Connect the sleeve
1
I
0
A
B