DiamaPro Systems SVX2-M 소유자 매뉴얼 - 페이지 5

{카테고리_이름} DiamaPro Systems SVX2-M에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DiamaPro Systems SVX2-M 8 페이지. Industrial vacuum

15. FILTER CLEANING DEVICE

& SUCTION MODE

To make cleaning effective the vacuum cleaner

must be in operation

MANUAL FILTER CLEANING

Close the suction nozzle (A) and act on the lever (B) to clean the filter,

with a fast movement.

If necessary, repeat the operation.

16. TROUBLESHOOTING

You can thus solve any problem that may occur.

Motors do not start.

u No electrical voltage.

u Check cables, plugs and socket.

Suction capacity decreases slowly.

u Filter, nozzle, suction hose or suction pipe may be blocked.

u Check, clean accessories. Clean filter.

Dust comes out during the vacuuming.

u Filter has not been fastened correctly or is defective.

u Check to see if filter is sitting properly; replace if required.

17. COLLECTION BAG USE

The dust and the particles are collected in a bag placed in the container

under the hopper.

The Infinity Bag system consists in a plastic tubular from which are ob-

tained 20/30 bags of different weights and dimensions.

Once finished or damaged, the tubular must be replaced by a new refill.

The operations below described must be carried out when machine is

turned off.

1 - Close the bag with two

distanced bands.

2 - Cut the strip between the

two bands.

3 - Pull the Infinity Bag end to

make a new bag.