Miller 300459001 소유자 매뉴얼 - 페이지 3
{카테고리_이름} Miller 300459001에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 300459001 17 페이지.
페이지 인쇄6.
Warning Label Definitions For CE Products
6
1
Warning! Watch Out! There are
possible hazards as shown by the
symbols.
2
Electric shock from wiring can kill.
3
Disconnect input plug or power before
working on machine.
4
5
1
Warning! Watch Out! There are
possible hazards as shown by the
symbols.
2
Disconnect input plug or power before
working on machine.
3
Wear safety glasses with side shields.
4
Plugged filter or hoses cause
1
2
7
4
Moving parts, such as fans, can cut
fingers and hands and cause injury.
Keep away from moving parts.
5
Wear safety glasses with side shields.
6
Read the Owner's Manual before
working on this machine.
7
Read the labels on the welding power
1
=
overheating and damage.
5
Read Owner's Manual.
6
Check and clean filter every 100
hours; also check condition of hoses.
7
Use Low Conductivity Coolant No. 043
810 for High-Frequency assisted or
3
4
8
source, wire feeder, or other major
equipment for welding safety
information.
8
Recycle or dispose of used coolant in
an environmentally safe way.
9
Do not remove or paint over (cover)
the label.
2
3
100 h. std.
043 810 (HF)
043 809 (AL)
S-178 910
Gas Tungsten Arc Welding
applications. Use Aluminum Protecting
Coolant No. 043 809 where coolant
contacts aluminum parts or for Gas
Metal Arc Welding applications or
where High Frequency is not used.
5
S-180 663
9
6
7
4/96
OM-235 464 Page 3