aquanique QPUV9 매뉴얼 - 페이지 3
{카테고리_이름} aquanique QPUV9에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aquanique QPUV9 7 페이지. 9 watt uv pond clarifier
3. Connect tubing from the outlet of your pump to the inlet of the
QPUV9. Fig. 3
NOTE: The inlet is marked "IN" on the lamp housing.
4. Connect tubing to the outlet of the QPUV9. The other end
can be connected to a spitter, waterfall, or any other water
feature for your pond. Fig. 4
NOTE: The outlet is marked "OUT" on the lamp housing.
5. Plug the QPUV9 into a properly grounded electrical outlet.
Fig. 5
6. Wait several seconds for the light to turn on then check the
indicator light to verify if the light is functioning correctly.
Fig. 6
NOTE: This clarifier has a safety feature that only allows the
UV light to turn on if the lamp holder is fully seated
into the lamp housing.
Before returning to your retailer, call our customer service department at
1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.
Pump
(not included)
Tubing
(not included)
Fig. 3
Submersible
pump in water
Fig. 4
GFCI
Fig. 5
Indicator light
Fig. 6
QPUV9
Connect this
end to a
water
feature.
QPUV9