aquanique QPUV9 Manuel - Sayfa 3

Su Filtrasyon Sistemleri aquanique QPUV9 için çevrimiçi göz atın veya pdf Manuel indirin. aquanique QPUV9 7 sayfaları. 9 watt uv pond clarifier

3. Connect tubing from the outlet of your pump to the inlet of the

QPUV9. Fig. 3

NOTE: The inlet is marked "IN" on the lamp housing.

4. Connect tubing to the outlet of the QPUV9. The other end

can be connected to a spitter, waterfall, or any other water

feature for your pond. Fig. 4

NOTE: The outlet is marked "OUT" on the lamp housing.

5. Plug the QPUV9 into a properly grounded electrical outlet.

Fig. 5

6. Wait several seconds for the light to turn on then check the

indicator light to verify if the light is functioning correctly.

Fig. 6

NOTE: This clarifier has a safety feature that only allows the

UV light to turn on if the lamp holder is fully seated

into the lamp housing.

Before returning to your retailer, call our customer service department at

1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.

Pump

(not included)

Tubing

(not included)

Fig. 3

Submersible

pump in water

Fig. 4

GFCI

Fig. 5

Indicator light

Fig. 6

QPUV9

Connect this

end to a

water

feature.

QPUV9