Burkert 2103 Series 추가 지침 - 페이지 6

{카테고리_이름} Burkert 2103 Series에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 2103 Series 12 페이지. Remote-positioner, installation on process valves with internal air flow
Burkert 2103 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (19 페이지)

페이지 인쇄

→ Push potentiometer slide downwards.

Potentiometer

Fig. 6:

Inserting slide into switch cam

→ Insert slide sideways into the switch cam; in doing so,

connect the housing of the position sensor to the actuator

and align.

NOTE!

▶ The potentiometer slide must be hooked into the switch

cam.

▶ Align the connection pieces of the position sensor with the

pilot air ports.

→ Push position sensor without turning it onto the actuator until

no gap is visible on the form seal.

Slide

Switch cam

english

Type 8635, Remote-Positioner

Assembling the position sensor

Fig. 7:

Aligning position sensor with the actuator

Fig. 8:

Actuator with attached position sensor

Switch cam with attached

slide

Connection piece of the

position sensor

Pilot air ports of the actuator

Form seal