Burkert 2103 Series Ek Talimatlar - Sayfa 6

Valf Konumlandırıcılar Burkert 2103 Series için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. Burkert 2103 Series 12 sayfaları. Remote-positioner, installation on process valves with internal air flow
Ayrıca Burkert 2103 Series için: Hızlı Başlangıç Kılavuzu (19 sayfalar)

Sayfayı Yazdır

→ Push potentiometer slide downwards.

Potentiometer

Fig. 6:

Inserting slide into switch cam

→ Insert slide sideways into the switch cam; in doing so,

connect the housing of the position sensor to the actuator

and align.

NOTE!

▶ The potentiometer slide must be hooked into the switch

cam.

▶ Align the connection pieces of the position sensor with the

pilot air ports.

→ Push position sensor without turning it onto the actuator until

no gap is visible on the form seal.

Slide

Switch cam

english

Type 8635, Remote-Positioner

Assembling the position sensor

Fig. 7:

Aligning position sensor with the actuator

Fig. 8:

Actuator with attached position sensor

Switch cam with attached

slide

Connection piece of the

position sensor

Pilot air ports of the actuator

Form seal