aquantica at2i 운영 매뉴얼 - 페이지 11

{카테고리_이름} aquantica at2i에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aquantica at2i 16 페이지. For the canon t2i

Following are the basic techniques. For more information and advanced photography please study the Canon T2i / 550D

instruction manual.

NOTE *The main dial control can access a wide range of modiﬁcation to the current functions allowing the

users to conveniently position vital controls at their ﬁngertip.

Rotate the Mode dial knob (key # 04) and select the desired exposure mode. Usefull options in sequence are:

Programmed AE (P), Shutter Priority AE (Tv), Aperture Priority AE (Av) or Manual Exposure (M) and at the end

of the dial, the video mode. preprogrammed mode are not really designed for underwater use and should be

avoided if possible.

Note: When using a ﬂash, it is reccomended that the camera be used only in Single Frame Motor Drive or

there is the possibillity that the camera will ﬁre before the ﬂash can recycle.

Pull the Shutter Release Lever partially back. This will activate the camera's meter and autofocus system.

If using manual focus use the Focus Knob (key # 8) on the housing or on the ﬂat port to focus.

If using the Manual adjust the main dial knob (key # 2) and AV lever (key # 26) to set the exposure by selecting

shutter speed and/or aperture.

Pull the Shutter Release Lever (key # 1) gently the rest of the way until the camera ﬁres.

Shooting tip:

The lever in the rear right portion of the housing (key #27) can be used to access the * (star) buttons, this button can be

modiﬁed to conform to your personal style of image making, careful reading of the Canon T2i / 550 manual is recommended

to pull the maximum out of theses features

TAKING A PICTURE

page 10