Burkert 2300 Series 빠른 시작 매뉴얼 - 페이지 16

{카테고리_이름} Burkert 2300 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 2300 Series 19 페이지. Remote-positioner, installation on process valves with internal air flow
Burkert 2300 Series에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 추가 지침 (12 페이지)

페이지 인쇄
Burkert 2300 Series 빠른 시작 매뉴얼
Risk of injury from unsuitable connection hoses!
Hoses which cannot withstand the pressure and temperature
range may result in hazardous situations.
▶ Use only hoses which are authorized for the indicated pres-
sure and temperature range.
▶ Observe the data sheet specifications from the hose
manufacturers.
The pneumatic connection of the angle-seat control
valve can be carried out only in connection with the
appropriate control unit.
Possible control units are:
Positioner Type 8692, 8694, 8696 and 8792;
Process controller Type 8693 and 8793.
8.4.1 Connection of the control medium
→ Connect the control medium to the pilot air port ("Fig. 8": 1)
(3 – 7 bar; instrument air, free of oil, water and dust).
→ Fit the exhaust line or a silencer to the exhaust air port
("Fig. 8": 3) and, if available, to the additional exhaust air port
("Fig. 8": 3.1).
If used in an aggressive environment, we recommend
conveying all free pneumatic connections into a neutral
atmosphere with the aid of a pneumatic hose.
16
english
Typ 2300
Technical data
Exhaust air port
Pilot air port
Additional exhaust air port only
with pilot-operated control
system for high air output from
(actuator size ø 130)
Fig. 8:
Pneumatic connection
Control air hose:
6/4 mm or 1/4" pilot air hoses can be used.
A pilot air port via G 1/8" thread is available as an option.
8.5
Start-up
After installing the device, run the X.TUNE function. This function
presets the control parameters.
Description – see operating instructions for the control.
8.6
Removal
WARNING!
Risk of injury from discharge of medium and pressure!
It is dangerous to remove a device which is under pressure
due to the sudden release of pressure or discharge of medium.
▶ Before removing a device, switch off the pressure and vent the
lines.
3
1
3.1