Miller Infinity Series 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Miller Infinity Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Infinity Series 32 페이지. Auto-darkening helmets
Miller Infinity Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (32 페이지)

페이지 인쇄

4-6.

Lens Delay Control

1 Lens Delay Adjustment Buttons

Lens Delay Adjustment

Buttons

2 Auto On/Off (Mode) Control Button

Mode Control Button

Use the Lens Delay Short and Long buttons

Use the Lens Delay Short

to adjust the time for the lens to switch to the

and Long buttons to adjust

clear state after welding or cutting.

the time for the lens to switch

The delay is particularly useful in eliminating

to the clear state after weld-

bright after-rays present in higher amperage

ing or cutting.

applications where the molten puddle re-

The delay is particularly use-

mains bright momentarily after welding. Use

ful in eliminating bright af-

the Lens Delay Control buttons to adjust de-

ter-rays present in higher

lay from 0 to 10 (0.1 to 1.0 second).

amperage

applications

The delay ranges for each mode are as

where the molten puddle re-

follows:

mains bright momentarily af-

Weld, Cut, And X-Modes - No. 0–No. 10

OM-269681 Page 12

Grind Mode - No delay adjustment

ter welding. Use the Lens De-

�

lay Control buttons to adjust

delay from 0 to 10 (0.1 to 1.0

second).

Lens Delay Adjustment Procedure

The delay ranges for each

� Press Auto On/Off (Mode) button to turn

mode are as follows:

Weld, Cut, X-Modes

� Press Auto On/Off (Mode) button to se-

Grind Mode

No delay ad-

justment

� Use Short and Long adjustment buttons

There is no lens delay

adjustment in the Grind

� Begin welding or continue with other

mode.

Lens Delay Adjustment

Procedure

There is no lens delay adjustment in

the Grind mode.

Press Auto On/Off but-

ton to turn helmet On.

Press Mode button to se-

helmet On.

lect desired function:

Weld, Cut, or X-Mode.

lect desired function: Weld, Cut, or X-

Use Short and Long ad-

Mode.

justment buttons to se-

lect desired delay.

to select desired delay.

Begin welding or contin-

ue with other lens adjust-

ments.

lens adjustments.

OM-269681 Page 1