Miller Infinity Series Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for Welding Accessories Miller Infinity Series. Miller Infinity Series 32 pages. Auto-darkening helmets
Also for Miller Infinity Series: Owner's Manual (32 pages)

Print Page
Miller Infinity Series Owner's Manual
4-6.

Lens Delay Control

2
1 Lens Delay Adjustment Buttons
1
Lens Delay Adjustment
Buttons
2 Auto On/Off (Mode) Control Button
2
Mode Control Button
Use the Lens Delay Short and Long buttons
Use the Lens Delay Short
to adjust the time for the lens to switch to the
and Long buttons to adjust
clear state after welding or cutting.
the time for the lens to switch
The delay is particularly useful in eliminating
to the clear state after weld-
bright after-rays present in higher amperage
ing or cutting.
applications where the molten puddle re-
The delay is particularly use-
mains bright momentarily after welding. Use
ful in eliminating bright af-
the Lens Delay Control buttons to adjust de-
ter-rays present in higher
lay from 0 to 10 (0.1 to 1.0 second).
amperage
applications
The delay ranges for each mode are as
where the molten puddle re-
follows:
mains bright momentarily af-
Weld, Cut, And X-Modes - No. 0–No. 10
OM-269681 Page 12
1
Grind Mode - No delay adjustment
ter welding. Use the Lens De-
�
lay Control buttons to adjust
delay from 0 to 10 (0.1 to 1.0
second).
Lens Delay Adjustment Procedure
The delay ranges for each
� Press Auto On/Off (Mode) button to turn
mode are as follows:
Weld, Cut, X-Modes
� Press Auto On/Off (Mode) button to se-
0
10
Grind Mode
No delay ad-
justment
� Use Short and Long adjustment buttons
There is no lens delay
adjustment in the Grind
� Begin welding or continue with other
mode.
Lens Delay Adjustment
Procedure
There is no lens delay adjustment in
the Grind mode.
Press Auto On/Off but-
ton to turn helmet On.
Press Mode button to se-
helmet On.
lect desired function:
Weld, Cut, or X-Mode.
lect desired function: Weld, Cut, or X-
Use Short and Long ad-
Mode.
justment buttons to se-
lect desired delay.
to select desired delay.
Begin welding or contin-
ue with other lens adjust-
ments.
lens adjustments.
OM-269681 Page 1