Miller RUNNING GEAR 운영자 매뉴얼 - 페이지 12
{카테고리_이름} Miller RUNNING GEAR에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller RUNNING GEAR 22 페이지.
SET-UP & ASSEMBLY (continued)
POLE
Securely fasten the pole to the pivot assembly on the front axle using the
machined bolt and nylon insert locknut.
Fasten the assist spring to the running gear steering box with the included
hardware. Adjust spring tension by loosening double nut on spring rod. Then
tighten or loosen the two nuts according to whichever adjustment you are
seeking and retighten the nuts to each other.
TANDEM
Tandems must be mounted correctly for proper performance. The tandem
when mounted will have the leg with the longer distance between the tandem
pivot and the spindle towards the front. Set tandems in place and slide the
shaft assembly through the pivot holes and the bushings in the tandems.
Secure in place with a nylon insert locknut. Grease tandem pivot.
Note: Tandems are the same for the left and right side.
8