Miller RUNNING GEAR Руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сварочные принадлежности Miller RUNNING GEAR. Miller RUNNING GEAR 22 страницы.

SET-UP & ASSEMBLY (continued)

POLE

Securely fasten the pole to the pivot assembly on the front axle using the

machined bolt and nylon insert locknut.

Fasten the assist spring to the running gear steering box with the included

hardware. Adjust spring tension by loosening double nut on spring rod. Then

tighten or loosen the two nuts according to whichever adjustment you are

seeking and retighten the nuts to each other.

TANDEM

Tandems must be mounted correctly for proper performance. The tandem

when mounted will have the leg with the longer distance between the tandem

pivot and the spindle towards the front. Set tandems in place and slide the

shaft assembly through the pivot holes and the bushings in the tandems.

Secure in place with a nylon insert locknut. Grease tandem pivot.

Note: Tandems are the same for the left and right side.