Miller 1098 Compassx 18 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Miller 1098 Compassx 18에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 1098 Compassx 18 13 페이지. 16 cb plus fluid head compassx series

Operating Instructions

4. Pan/Tilt Drag Control

The Compass

Fluid Head offers selectable positions of

fluid drag in the Pan and Tilt (including zero positions). The

settings are equally stepped from lighter drag in position 1

up to heavier drag in position 3 on CX2 and CX6 models and

position 5 on CX8, CX10 and CX18 models, the drag plates

are completely disengaged in position zero.

• Do not pan or tilt the Fluid Head whilst adjusting PAN or

TILT DRAG CONTROL or whilst the PAN and TILT DRAG

CONTROL is between settings.

• The drag setting can be changed at any tilt or pan angle.

5. Pan/Tilt Lock Control

The Compass

Fluid Head offers high capacity caliper disc

brake system to hold the Fluid Head in a fixed pan and/or tilt

position. Camera position will not change when applying or

releasing the Pan-tilt locks.

• Do not pan or tilt the Fluid Head whilst the PAN or the TILT

LOCK is partially applied.

6.Illumination

The Compass

Fluid Head offers illumination of the BUBBLE

LEVEL when the low ambient light conditions exist.

Illumination can be achieved by pressing the LED BUTTON

once. The light will switch off after 10 seconds.

Fig. 5