Miller 1098 Compassx 18 Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Miller 1098 Compassx 18. Miller 1098 Compassx 18 13 pagina's. 16 cb plus fluid head compassx series
Pagina afdrukken
Operating Instructions
4. Pan/Tilt Drag Control
x
The Compass
Fluid Head offers selectable positions of
fluid drag in the Pan and Tilt (including zero positions). The
settings are equally stepped from lighter drag in position 1
up to heavier drag in position 3 on CX2 and CX6 models and
position 5 on CX8, CX10 and CX18 models, the drag plates
are completely disengaged in position zero.
• Do not pan or tilt the Fluid Head whilst adjusting PAN or
TILT DRAG CONTROL or whilst the PAN and TILT DRAG
CONTROL is between settings.
• The drag setting can be changed at any tilt or pan angle.
5. Pan/Tilt Lock Control
x
The Compass
Fluid Head offers high capacity caliper disc
brake system to hold the Fluid Head in a fixed pan and/or tilt
position. Camera position will not change when applying or
releasing the Pan-tilt locks.
• Do not pan or tilt the Fluid Head whilst the PAN or the TILT
LOCK is partially applied.
6.Illumination
x
The Compass
Fluid Head offers illumination of the BUBBLE
LEVEL when the low ambient light conditions exist.
Illumination can be achieved by pressing the LED BUTTON
once. The light will switch off after 10 seconds.
6
Fig. 5