Miller cineline 70 운영자 매뉴얼 - 페이지 10

{카테고리_이름} Miller cineline 70에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller cineline 70 17 페이지. Fluid head

Operating Instructions

4 Camera Plate Lock Adjustment

The Camera Plate Lock is designed to secure the

CAMERA PLATE in a set position. The Cineline 70 BASE

PLATE can accept a third party (Arri type) CAMERA

PLATE, however, the Camera Plate Lock may need to be

adjusted to account for small dimensional variations in

third party CAMERA PLATES that can significantly affect

the locking function.

4.1 Press and hold the SAFETY RELEASE KNOB then pull the

SIDE LOAD LOCK LEVER outwards.

4.2 With the CAMERA PLATE in place, gently push the

SIDE LOAD LOCK LEVER towards the BASE PLATE until

resistance is felt – this is the start of the locking action.

Check the position of the SIDE LOAD LOCK LEVER as

shown in figure 9.

4.3 Adjustment is necessary if the SIDE LOAD LOCK LEVER

position is outside the recommended range. Follow figure

9 to determine the correct method of adjustment.

Unlock

Counter

Clockwise

3mm Hex Key

Lock

Flat Screwdriver

Clockwise

Fig. 8