Miller Elite Series 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Miller Elite Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Elite Series 32 페이지. With external grind button auto-darkening helmets
Miller Elite Series에 대해서도 마찬가지입니다: 작동 지침 (32 페이지), 매뉴얼 (20 페이지), 소유자 매뉴얼 (32 페이지)

페이지 인쇄

6-2.

Replacing Inside Lens Cover — Digital Performance Series

1-1. Replacing Inside Lens Cover

Helmets

Never use the auto-darkening lens

without the inside and outside lens

covers properly installed. Welding

spatter will damage the auto-darken-

ing lens and void the warranty.

1 Lens Assembly

2 Inside Lens Cover

Remove the lens cover holder (see Section

6-1). Remove lens assembly.

OM-256476 Page 16

Never use the auto-darkening

lens without the inside and out-

side lens covers properly

installed. Welding spatter will

damage the auto-darkening

lens and void the warranty.

Lens Assembly

inside Lens Cover

Remove the lens cover holder (see

Section NO TAG). Remove lens as-

sembly.

Remove the inside lens cover by pry-

ing the cover up at either thumbnail

opening at each side of the cover.

Digital Performance Series Helmets

Remove the inside lens cover by prying the

cover up at either thumbnail opening at each

side of the cover. Slide cover it out of either

side of frame. Replace lens cover and rein-

stall the assembly in the helmet by reversing

the above procedure.

�

Be sure the cover lens is seated prop-

erly (flat) to prevent fogging.

OM-256476 Page 1